When CME and CUE are integrated and you place a call from a CCM to CME using G729 and the call rolls over to CUE, then you need to have transcoding enabled in CME for this to work. This is needed because CME is controlling the call leg to CUE via SIP. There is no point in having transcoder at CCM and this will not be used.
CUE – CME – CCM Integration
Posted: May 2, 2006 by cciestudy in Callmanager Express, Cisco Unity Express, Media ResourcesComments
What a pitty there are not comments in this post!! I have doubts about this issue…
I’m also having problems with this issue. Call coming in from CME to CME as g729 fails when transfer to CUE. Call coming in as g711 works just fine. Also, when the call coming in as g711 allows me to leave a voice mail but I can’t use the keys on the phone. Any ideas?