Comments for CCIE Voice notes

Comment on H225 timeout for H323 dial peers by ññandu.

ññandu. — Sat, 07 Nov 2009 00:59:58 +0000

hola

Comment on 6608 MGCP configuration by Dan Williams

Dan Williams — Mon, 02 Nov 2009 15:21:11 +0000

Good, quick, to the point write up.

Comment on CCM Server name by greg

greg — Mon, 26 Oct 2009 15:34:37 +0000

You can change the host name via CLI using the following commands.
set network hostname “ccmhostname”
then reboot

Comment on Callmanager – AD integration – Adding /Deleting users from CCM admin page by John82

John82 — Fri, 23 Oct 2009 09:49:51 +0000

Dutch inflection: The rules that prove the exception. ,

Comment on How to enable/disable spelled name search? by Jim Kuderski

Jim Kuderski — Thu, 22 Oct 2009 11:47:43 +0000

Very good information! What / where could you change the name field it is comparing against to made a user ‘hidden/unlisted’ from name search?
Thanks in advance. Jim

Comment on Callmanager – AD integration – Adding /Deleting users from CCM admin page by Merlin48

Merlin48 — Thu, 22 Oct 2009 10:16:58 +0000

This committee, in turn, works with a task force whose members have experience in specific issues to plan annual projects. ,

Comment on How to enable Overlap Send-receive in CM 4.1 by rani

rani — Tue, 20 Oct 2009 10:35:53 +0000

please explain, what is Overlap Sending and Receiving with Cisco CallManager

Comment on About by tonny

tonny — Sat, 17 Oct 2009 03:56:28 +0000

VfUXlV http://mMs93Hfppskd6wngIosSu.net

Comment on How to speed up CTI port addition process on IPCCX? by hotel

hotel — Tue, 13 Oct 2009 15:47:24 +0000

I read about this on another site but your post is so much better

Comment on Ringback issues by Beven

Beven — Fri, 18 Sep 2009 14:20:37 +0000

How do i configure a distinct ringback tone when a caller is dialing a busy dual-line DN. I need my users to differentiate between an unanswered call and a call which is on call-waiting.

Comment on QoS for CUE CCM Integration by Sean Reynolds

Sean Reynolds — Mon, 14 Sep 2009 12:34:19 +0000

this information very nice.Voice IP Comms are the Premier Provider of business telephone systems in the UK.

Comment on Fax configuration by James Brown

James Brown — Wed, 02 Sep 2009 10:41:29 +0000

Cupidazul,

Yes, I agree that your global command will cover all dial peers for T.38. However, will it also work for MGCP?

Regards

James.

Comment on MMoh via SRST in IOS by Adam

Adam — Mon, 31 Aug 2009 18:44:29 +0000

Sry – make sure “that when you make changes”.

Wow this post is old…but useful…:)

Comment on MMoh via SRST in IOS by Adam

Adam — Mon, 31 Aug 2009 18:43:45 +0000

Make sure you make changes you do the NO command then reapply your new setting under the Fallback configuration.

This makes a huge difference. Spent 3 hrs trblshooting MoH and it came down to that.

Thx for the info!

Comment on CUE autoattendant – how to dial an extension at any time during the prompt? by David Axler

David Axler — Thu, 13 Aug 2009 17:18:36 +0000

Could you pleasse send me this script if you still have it available

thanks!

Comment on Downloads by Akhilesh

Akhilesh — Thu, 13 Aug 2009 10:42:54 +0000

please infome me at my mail id—akhilesh3384@gmail.com

Comment on Downloads by Akhilesh

Akhilesh — Thu, 13 Aug 2009 10:40:51 +0000

hi all ,

will u help me to find VOIP related trobleshooting tips & notes, i need it……….i am just trying to start my career in VOIP feild. I have complete my CCNA < CCVP.. & searching job .any one can help me………thanks in advance……..

Comment on Show isdn service by Kiran

Kiran — Wed, 05 Aug 2009 13:02:42 +0000

Good stuff mate. I was wondering if there is a way to test ISDN channels one at a time. For instance I want to test calls are going thru channel number 10, how do I do that? Is there a way to put maintenance block on all the channels and leave only 10 so it picks the calls?

Regards,
Kiran

Comment on FXO private line by bagus

bagus — Mon, 03 Aug 2009 08:23:57 +0000

I have it work by adding T after 82:

destination-pattern 82T

The side effect is after I off-hook the phone, it will automatically connect to fxo port, but it still work.

Comment on CME-CUE on two different routers by Benjamin Du

Benjamin Du — Mon, 20 Jul 2009 23:39:36 +0000

a. On the host gateway
voice service voip
allow-connections h323 to sip

b. On the CME gateway, the h323 dial-peer must be configured dtmf-relay h245-alphanumeric

Comment on Downloads by veera babu

veera babu — Fri, 17 Jul 2009 08:52:26 +0000

Please help me….

Comment on CME – CUE Integration by Matty

Matty — Thu, 16 Jul 2009 09:11:54 +0000

I’m trying to setup transcoding between CCM7 and CUE7.

My SCCP config looks good but where do I configure it on CM? Should it be as a transcoder? Or an MTP?

I’m guessing the ‘telephony-service’ config above is only required when using CME?

Thanks

Comment on T37 fax inbound/outbound with Unity 4.0(5) by SHU

SHU — Fri, 10 Jul 2009 09:52:15 +0000

How to set CallerID in mail to fax? Now cisco generate setup message to fax number (from mail) without caller id

Comment on IP phone agent service by Fred

Fred — Sat, 27 Jun 2009 14:50:33 +0000

Hi,

Great, but in the Install Guide, I can’t see any infos about the Service Parameter Information.
I would like to add the extension in a Parameters, I try “Extension”, “Device”,.. but I don’t find the good Parameter Name … Can you help me ?

Comment on Downloads by GCS_Casper

GCS_Casper — Wed, 17 Jun 2009 14:19:16 +0000

I know that I am missing something. When a phone call comes in on my 2821 – the caller hears 2 rings before my router actually picks up the call. Is there something I can change in my config?

Comment on Ringback issues by manet

manet — Mon, 08 Jun 2009 18:05:17 +0000

We have a problem with delay in hearing ringback tone between 2 IP phones.

The call between 2 IP phones within the same CUCM cluster could be established. I can hear FIRST ringback tone on calling IP phone, and than should wait for approximately 8-10 seconds for the SECOND ringback tone on calling phone. Meanwhile, called IP phone regularly rings for 4-5 times.

I have 4-digit local extension starting with 11XX.
All other route patterns in dial plan start with ‘0′ (for example, long-distance call 00xxx…, PSTN local calls 012XXXXXX, and so on). So, as far as I understand, there is ‘no space’ for route pattern overlapping.

Any suggestion, direction to read for solution would be highly appeciated.

Comment on CME – Overlay vs Overlay with call waiting by ron

ron — Fri, 05 Jun 2009 18:34:12 +0000

ephone-dn 2 channel
number 3001
huntstop channel
preference 1 *********
ephone 1
button 1c1,2

what is the purpose of preference 1 when line is shared. since both phone will ring.

Comment on MLPP by julien

julien — Wed, 03 Jun 2009 09:26:18 +0000

I’m also interested for adjusting the 30 seconds timer.

Is it possible to implement MLPP with SIP phone? I suppose the call manager has just to send a BYE SIP message…Even if the MLPP indication is not possible on the phone.

Comment on First CCIE study by Chikkis

Chikkis — Mon, 25 May 2009 13:18:55 +0000

Cisco Unified Contact Center Express 7.0(1) Tutorials
—————————————————————-

Cisco Unified Contact Center Express 7.0 Installation on vmware and configuration.

UCCX7.0-Part1.avi
————————-
http://rapid share.com/files/236642599/UCCX7.0-Part1.avi

UCCX7.0 is part ccie voice version 3

hope this is helpfull

Comment on MGCP Template by MGCP Template | AtomicNets.com

MGCP Template | AtomicNets.com — Wed, 20 May 2009 04:41:43 +0000

[...] Copied from CCIE Voice Notes. [...]

Comment on Gatekeeper – Viazone behaviour by Sharmic

Sharmic — Sun, 10 May 2009 13:44:57 +0000

Is it possible to configure Via gatekeeper in all cisco GK IOS? i am unable to configure in in mt 2600 gk..

Comment on CME B-ACD by Andrzej

Andrzej — Sun, 10 May 2009 10:06:09 +0000

I have some problems with b-acd. All calling should be routed to the hunt-group. When someone is calling he can hear: “press 31 to send the fax or wait for an operator”. I have configured it in drop-through mode and do not know how to change configuration file to give caller possibility to chose fax number (FXS line).
Even if someone who is calling is in queue I can’t switch him to 31, fax number.
Do you have any idea, here is my config file:
voice-card 2
!
voice-card 3
!
!
application
service queue flash:app-b-acd-2.1.0.0.tcl
param queue-len 10
param aa-hunt1 1111
param number-of-hunt-grps 1
!
service aa1 flash:app-b-acd-aa-2.1.0.0.tcl
param queue-exit-option1 1
param queue-exit-extension1 1
paramspace english index 1
param aa-pilot 126552457
param number-of-hunt-grps 1
param handoff-string aa1
paramspace english language en
param call-retry-timer 10
param service-name queue
param second-greeting-time 20
param drop-through-option 1
param drop-through-prompt _bacd_welcome.au
param max-time-vm-retry 2
param max-time-call-retry 700
param voice-mail 1
!
package paramspace english
!
!
dial-peer voice 100 pots
service aa1
destination-pattern 0T
incoming called-number 126552457
port 3/0
!
dial-peer voice 200 pots
destination-pattern 31
port 2/0
!
!
telephony-service
max-ephones 12
max-dn 24
ip source-address 192.168.100.1 port 2000
cnf-file location flash:
time-format 24
date-format dd-mm-yy
max-conferences 8 gain -6
moh flash:music-on-hold.au
dn-webedit
transfer-system full-consult
create cnf-files version-stamp 7960 Jan 03 2009 12:32:02
!
!
ephone-dn 11
number 21
!
!
ephone-dn 13
number 23
!
!
ephone-dn 14
number 22
!
!
ephone-dn 16
number 24
!
!
ephone-dn 20
number 2020
!
!
ephone 1
mac-address 000A.B8CB.51B2
button 1:11
!
!
!
ephone 3
mac-address 0023.049C.323A
button 1:13
!
!
!
ephone 4
mac-address 0023.049C.4CBA
button 1:14
!
!
!
ephone 6
mac-address 0023.049C.32ED
button 1:16
!
!
!
ephone 10
!
!
ephone-hunt 1 sequential
pilot 1111
list 21, 22, 23, 24
timeout 10, 5, 5, 5

Comment on How to toggle between 12 and 24 hr time format in Unity by Owoqxrvn

Owoqxrvn — Thu, 07 May 2009 19:09:17 +0000

1Zry3t comment2 ,

Comment on Issues with gatekeeper zone prefix and end point registration by andry

andry — Thu, 07 May 2009 18:16:39 +0000

lVLiMw comment3 ,

Comment on CME – DND by Tinusz

Tinusz — Wed, 06 May 2009 08:40:03 +0000

Just set ‘no dnd feature-ring” on the ephone and give the button configuration “feature-ring” with “button 1f1″ command and the phone will ring button 1 with DND active

Comment on Changing IP Address – registry settings by saahib

saahib — Tue, 05 May 2009 16:56:54 +0000

I am unable to view any pictures you post, hence critical piece of info is missing for me. Could you please check into it. Thanks

Comment on Downloads by ZOmbo

ZOmbo — Fri, 01 May 2009 22:52:16 +0000

hi please send me material for ccie Voice writing next week wendsday..please help..email:mabena.tshepo01@gmail.com

Comment on Downloads by ZOmbo

ZOmbo — Fri, 01 May 2009 22:51:24 +0000

hi please send me material for ccie Voice writing next week wendsday..please help

Comment on How to setup B-ACD so that CME phones and FXO ports can access it? by Tinusz

Tinusz — Tue, 28 Apr 2009 08:07:03 +0000

Don’t forget to add “dtmf-relay h245-alphanumeric” to the dial-peers, otherwise you can’t enter any digits in the script.

Comment on ATA 186 -setting static Vlan ID in ATA (SCCP) by Cisco ATA 186 Setting Static VLAN - Tool to Calculate VLAN Value « Inside Greg’s Brain

Mon, 27 Apr 2009 07:58:11 +0000

[...] not going to explain the complicated process, because someone has already gone through the trouble, here.What I did, was to write an Autoit script that will do all the work for you! All you have to do is [...]

Comment on FXO private line by alsindi

alsindi — Sun, 26 Apr 2009 06:27:07 +0000

Hi,

I have tried the above many times, but it doesn’t work, they say the only way it will work is through Translation Rules that it could identify the calling extension to associate it with the voice port.

has anyone tried the above and it worked???

Comment on ATA 186 -setting static Vlan ID in ATA (SCCP) by Greg Sowell

Greg Sowell — Fri, 24 Apr 2009 14:05:41 +0000

I wrote a little program that will do the Voice VLAN calculation for you. All you have to do is put in the decimal VLAN ID. Link to the page is HERE. BTW, thanks for the great post!

Comment on Alias static by Ted Burrett

Ted Burrett — Fri, 24 Apr 2009 11:31:41 +0000

This topic is quite hot in the net right now. What do you pay attention to while choosing what to write ?

Comment on Qos for WAN by Selt

Selt — Sun, 19 Apr 2009 21:52:06 +0000

in above comment, I wasn’t maybe clear enough:
PVC Contracted speed is considered PVC Speed in QoS SRND, where in fact actual port speed might be completely different (but of course, always at least equal or higher than PVC speed) since under one port you can have multiple PVCs.

ah, yeah, then also you need to be careful with ‘percent’ commands as they will actually be calculated based on the interface bandwidth, which is not CIR but however, it will come to the same point since if requirement is in percents as well then it doesn’t matter. However, if you need to convert your real values to percents, then you need to use given value against your 95%CIR value and then convert that to percentage value of that 95%CIR value… ))
in example: your PVC speed is 768kbps, then you will take 95% of that when configuring CIR value under FR which is 729,600 bps.
However, your port speed can still be full T1.
then, if you need to set 128kbps for voice part but you want to configure that with percentage command, you will actually have the situation that by default only 75% of the bandwith is used for the calculation, so the 100% of the percent configurable value corresponds to actual 75% of the available bandwith (which is full T1, so 75% of T1 is taken as 100% for the BW distribution via bandwith percent command).
However, that’s what is going to happen if you forget to set your bandwith on interface. But you can set bandiwth for interface to be your actual CIR value and then you are good to go

Comment on Qos for WAN by Selt

Selt — Sun, 19 Apr 2009 21:31:01 +0000

This ‘CIR’ thing might be very confusing since you mentioned for CIR = “set it to 95% of the actual link speed” and then you gave example for voice TS where your CIR is set to 768000 (where that by no means can be 95% of the link speed but actual link speed, if at all).
So, confusion comes in terms of ‘link speed’ and in terms of voice TS config.
Are you trying to say that when configuring voice TS, one should not set CIR to 95% of link speed?
then again, what is a link speed?
So, QoS topic requires to be more consistent.
I.e.:
QoS SRND states this:
Recommendation: Set the CIR to 95 percent of the PVC contracted speed.

So, this is NOT a link speed, right?
This is PVC contracted speed, which is actually CIR.
So, recommendation is that if you contract CIR with provider, when configuring your router, you should consider 95% of that actual CIR contracted value as your base point for QoS (while, btw, you should still consider actual CIR value for fragmentation, when setting fragment size)

Comment on How to debug DTMF relay? by Debugging DTMF Relay on a Gateway | AtomicNets.com

Debugging DTMF Relay on a Gateway | AtomicNets.com — Fri, 17 Apr 2009 09:10:33 +0000

[...] Copied from CCIE Voice [...]

Comment on Significance of $ in dial-peer destination pattern by Junaid

Junaid — Wed, 15 Apr 2009 23:59:17 +0000

DasTo, i am not sure if you got your voice translation profiles working ,i did..i found some good tutorials at brainbump.net.Check one for dial-peers and voice rules/profiles:

http://www.brainbump.net/2009/04/gns3how-to-setup-cme-sip-trunk-to-voip-sip-service-provider-advanced-config-part1b/

Hope it helps!

Comment on Alias static by How to Get Six Pack Fast

How to Get Six Pack Fast — Wed, 15 Apr 2009 14:54:59 +0000

Not that I’m impressed a lot, but this is more than I expected for when I stumpled upon a link on Furl telling that the info here is quite decent. Thanks.

Comment on 6608 MGCP configuration by vlance

vlance — Mon, 13 Apr 2009 08:45:22 +0000

Hey
How do change the port type ?
When I do a >show port 3/1 I see port type unknow and my T1 will not register.
Thanks

Comment on How to setup PLAR in CME by Udit

Udit — Wed, 08 Apr 2009 21:56:47 +0000

Here is another that will do PLAR in CME

ephone-dn 1
number 100
trunk 200

ephone 1
button 1:1
autoline 1

As soon as you will go off-hook, 200 will be dialed.

HTH

Comment on After hours block pattern by PiterKokoniz

PiterKokoniz — Tue, 07 Apr 2009 22:40:55 +0000

Hello !!!
I am Piter Kokoniz. Just want to tell, that I’v found your blog very interesting
And want to ask you: is this blog your hobby?
Sorry for my bad english:)
Thank you:)
Piter.

Comment on After hours block pattern by RaiulBaztepo

RaiulBaztepo — Sat, 28 Mar 2009 21:21:57 +0000

Hello!
Very Interesting post! Thank you for such interesting resource!
PS: Sorry for my bad english, I’v just started to learn this language
See you!
Your, Raiul Baztepo

Comment on Downloads by vlance

vlance — Wed, 25 Mar 2009 12:50:08 +0000

hi all
thanks for the site there is lots of useful tips and tricks here
i finally understand the alias command in srst.
my lab in few weeks “sweating” with slight panic and nervesness but i think i’m ready
have started working on speed this week and its taking me up to 10 hours to finish a mock exam, but slowly improving

“the more i practice the luckier i get” — Gary Player

Comment on Downloads by sahil

sahil — Wed, 25 Mar 2009 09:07:51 +0000

Hi,
Every one can any body send me the CCIE meterial on this mail id mohdsahil4u@yahoo.com

thanks in advance

Comment on H323/MGCP – Caller ID Display by Kinan

Kinan — Fri, 20 Mar 2009 18:49:18 +0000

Hi,
Did you mean that Caller ID can be passed from 2800 gateway to a CM version 7.x over MGCP??
I found this article at CISCO site and it partially tilling me it won’t work with that combination: http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_tech_note09186a0080237271.shtml
Additionally, I have configured this on our network and lost Caller ID on all of our incoming lines.
Any idea?

Comment on Port used by Callmanager to register with Gatekeeper by Martin

Martin — Wed, 11 Mar 2009 02:49:35 +0000

It’s about the CCM, not the GK.
It defines on what port the CCM is expecing incoming signaling traffic for this trunk.
If you have more then 1 trunk you need more then 1 TCP port to differentiate traffic. That’s why it’s only valid for 1 trunk.

Comment on Callmanager – AD integration – Adding /Deleting users from CCM admin page by chikkis1

chikkis1 — Mon, 09 Mar 2009 07:35:40 +0000

How do you integrate ADS for IPCC 4.0, what are DN and cn used?

Comment on How to speed up CTI port addition process on IPCCX? by chikkis1

chikkis1 — Mon, 09 Mar 2009 07:23:36 +0000

how do you setup a cluster for IPCC express 4.0 with windows ADS/ LDAP???

Comment on MoH Scenarios by Alexwebmaster

Alexwebmaster — Tue, 03 Mar 2009 12:01:29 +0000

Hello webmaster
I would like to share with you a link to your site
write me here preonrelt@mail.ru

Comment on CME – DND by Luissurf

Luissurf — Fri, 27 Feb 2009 23:02:20 +0000

What if I have the call fwr noan set to voice mail, and if I press the dnd softkey and I want the phone to still ringing even if dnd feature is enable.

Comment on E1 R2 ANI by Teodor Georgiev

Teodor Georgiev — Wed, 25 Feb 2009 08:21:00 +0000

No, R2 does not suppport caller-name at all. It is an ancient signaling system

Comment on CME – Gatekeeper registration by Martin

Martin — Sun, 22 Feb 2009 08:34:51 +0000

telephony-service
dialplan-pattern 1 4085550100 extension-length 4 extension-pattern 4… no-reg

ephone-dn x
number 4000 secondary 4001 no-reg both

http://www.cisco.com/en/US/docs/voice_ip_comm/cucme/command/reference/cme_n1ht.html#wp1014232

Comment on CME – Overlay vs Overlay with call waiting by lightspeed

lightspeed — Tue, 10 Feb 2009 13:55:04 +0000

Is’t possible to make prioritization for phones? As for an instance: When 1st inbound call to shared line comes to CME, it will forward call to the ephone with priority 1, and waiting its rejection or answering for a while.
If call would be rejected, so ccme forwards it to another phone with priority 2. If call would be answered, and another call comes into ccme, it forwards this call to the phone with second priority..

Comment on CME – Unity Integration using Huntstop by Darren

Darren — Fri, 06 Feb 2009 03:29:54 +0000

i have this configuration with frequent MWI issues. i currently have my ephone-dn’s for this setup with 10 incoming and 2 outgoing mwi ports. I am just wondering if my 2 ports are the issue? I have tried with 1 previously but this seems to run better for longer.

ephone-dn 11
number 5010
name voicemail1
preference 1
no huntstop
!
!
ephone-dn 12
number 5010
name voicemail2
preference 2
no huntstop
!
!
ephone-dn 13
number 5010
name voicemail3
preference 3
no huntstop
!
!
ephone-dn 14
number 5010
name voicemail4
preference 4
no huntstop
!
!
ephone-dn 15
number 5010
name voicemail5
preference 5
no huntstop
!
!
ephone-dn 16
number 5010
name voicemail6
preference 6
no huntstop
!
!
ephone-dn 17
number 5010
name voicemail7
preference 7
no huntstop
!
!
ephone-dn 18
number 5010
name voicemail8
preference 8
no huntstop
!
!
ephone-dn 19
number A01
name MWI
preference 1
no huntstop
!
!
ephone-dn 20
number A01
name MWI
preference 2
!
!
ephone-dn 50
number 8917 secondary 8918
mwi on-off
!

Comment on CME – Caller name display by koussay

koussay — Sun, 01 Feb 2009 13:55:06 +0000

im not getting the caller id from out side , its given me unknown caller always

Comment on IPMA – using Wizard by serena

serena — Fri, 30 Jan 2009 12:30:59 +0000

Harris screamed serena williams nip slip out until only the newhaven regiment asthey.

Comment on CME and TFTP commands by cpriego

cpriego — Fri, 30 Jan 2009 01:17:34 +0000

make sure that all of the files are on the flash root

Comment on Fax passthrough – H323 IOS gateway to ATA H323 by cisco waas review

cisco waas review — Sun, 25 Jan 2009 12:16:39 +0000

I wish Cisco could get their WAAS solution right and finally beat up on Riverbed.

Comment on CME – CUE – MWI setting by Ryan

Ryan — Mon, 19 Jan 2009 21:00:02 +0000

have you tried dialing the mwi off extension i.e. in the example above dialing 1598 from the phone should turn the light off.

Comment on Downloads by Bookmarks about Voice

Bookmarks about Voice — Mon, 05 Jan 2009 12:15:08 +0000

[...] – bookmarked by 3 members originally found by memorii215 on 2008-12-06 Comment on Downloads by SANJIB http://cciev.wordpress.com/downloads/#comment-7280 – bookmarked by 2 members originally found by [...]

Comment on CME B-ACD by Chikkis

Chikkis — Mon, 05 Jan 2009 06:57:47 +0000

thanks for nice tutorials. looking at this tutrials and trying some new in it.

I have asterisk box on vmware. I am trying to make a trunk in between them.

here few deatils of the lab.
1. asterisk box on VMWare ip 192.168.2.14
2. XP Hostmachine ip address 192.168.2.11
3. 3725 Router with CME on GNS3 ip 192.168.2.20
4. insatlled Bind 9.6 working fine.

however i and trying to add the DNS a record on the DNS server.

Lets hope i shld be able finish this lab.

Thanks
Chikki

Comment on IPMA – using Wizard by finger

finger — Mon, 29 Dec 2008 00:39:18 +0000

The time her belly banged in her sleep and i created a human.

Comment on Downloads by Amritesh

Amritesh — Mon, 22 Dec 2008 07:40:23 +0000

Dear Rajesh, Please send me the lab at amritesh.anand@gmail.com if you have that.

Regards,
Amritesh Anand

Comment on Unity MWI by sinan

sinan — Fri, 19 Dec 2008 15:11:29 +0000

as far as I know it must be like that phone lines should have a css which includes the partitions of unity pilot numbers’ and MWI on/off ’s partitions .

Comment on CM 4.1 ports (important) — all ports are destination ports unless specified by configure cisco waas

configure cisco waas — Thu, 18 Dec 2008 16:27:46 +0000

We are currently budgeting for Cisco WAAS for our WAN

Comment on How to setup B-ACD so that CME phones and FXO ports can access it? by cisco waas configuration

cisco waas configuration — Thu, 18 Dec 2008 16:27:26 +0000

I would take a look at this information about Cisco WAAS

Comment on Unity MWI by KarenM

KarenM — Thu, 18 Dec 2008 09:08:19 +0000

Hiya…

Wasn’t what I was looking for, but great stuff. All the best….

Comment on Fax configuration by cisco waas exposed

cisco waas exposed — Mon, 15 Dec 2008 12:06:01 +0000

We are currently budgeting for Cisco WAAS for our WAN

Comment on Downloads by Sharmic

Sharmic — Sun, 14 Dec 2008 19:43:41 +0000

Rajesh….

I need the senario ..please sent it to sharmiclalu@gmail.com

Comment on Downloads by Daron

Daron — Wed, 10 Dec 2008 16:16:13 +0000

HI all

can some one please send me the lab scenarios ( Got my Lab next Feb) please send to daronhamilton@googlemail.com

Comment on IPMA – using Wizard by first

first — Fri, 05 Dec 2008 20:34:26 +0000

As i slurp the first sexual experience beach towards the morning, you talk.

Comment on Extension mobility by Pushkar Bhatkoti

Pushkar Bhatkoti — Sun, 30 Nov 2008 13:09:06 +0000

modification. subscribe this logout profile to User Device profile.

always make sure:

why?

u walk into a meeting room, just press service button select Em login: (coz it shud be on physical). then u put your username and pass. EMprofile gets loadeld into phone and uget your extension.

then what?

if u want to walk away and logout yourself from meeting room phone. since you are already in your EM profile so thats why the logout profile shud be on user device profile.

-pushkar bhatkoti

Comment on Unity Live Reply – Gotchas by free online christmas game

free online christmas game — Sat, 29 Nov 2008 10:22:52 +0000

Idolovethattime free online christmas game >:-)))

Comment on Show isdn service by wan accelerators

wan accelerators — Thu, 27 Nov 2008 08:18:03 +0000

John sums up telepresence from a network perspective, “Telepresence is an interactive real- time application, which means it is delay sensitive, loss sensitive and jitter sensitive. This sounds familiar: it is just like VoIP, with the one difference being that it has huge bandwidth requirements.” It’s that last part that makes things more difficult. No form of QoS can allocate bandwidth that doesn’t exist and it doesn’t have provisions to force the application to downscale the experience based on realtime metrics. …

Comment on MoH Scenarios by wan accelerator

wan accelerator — Thu, 27 Nov 2008 08:11:24 +0000

Bangor car dealers and realtors: It’ s a race to see who can rip you off the most.

Comment on Configuring PPP multilink and fragmentation over Frame-relay by riverbed wan optimization

riverbed wan optimization — Thu, 27 Nov 2008 08:03:00 +0000

Abstract: We describe the LHCb detector simulation application (Gauss) based on the Geant4 toolkit. The application is built using the Gaudi software framework, which is used for all event- processing applications in the LHCb experiment. The existence of an underlying framework allows several common basic services such as persistency, interactivity, as well as detector geometry description or particle data to be shared between simulation, reconstruction and analysis applications. The main benefits of such…

Comment on IPMA – using Wizard by gagging

gagging — Wed, 26 Nov 2008 18:52:25 +0000

Caroline strongly aroused women tied and gagged by while you were really shocked bywhat.

Comment on Downloads by Tommy

Tommy — Wed, 26 Nov 2008 17:31:32 +0000

Hi everyone

CCIECERT have released new version at NOV 2008 if you have plz ping to me (ckim0908@gmail.com)

Comment on List of items to configure on all routers/switches by Jeson

Jeson — Sat, 15 Nov 2008 23:09:19 +0000

Logging sync works on vty and con.

I would also create aliases for some common commands.
eg:
alias exec sb show run | begin

Comment on Downloads by Jim

Jim — Sat, 15 Nov 2008 02:25:47 +0000

Hi Rajesh,

Please email me the material: movsy1@gmail.com

Hope it may help me to clear the Voice LAB exam at first attempt in Dec 2008.

Thanks

Jim

Comment on Downloads by Aseelo

Aseelo — Fri, 14 Nov 2008 22:42:16 +0000

Hi rajesh,

I really need these scenarios, if possible.
Could you please send me the scenarios to my email: auokok@gmail.com

Regards,

Comment on How to network Callmanager to CME using two Gatekeepers and H323 Proxy. by hunter

hunter — Wed, 12 Nov 2008 18:57:36 +0000

myspace

Comment on PPP Virtual template and Frame-relay by wan optimization

wan optimization — Mon, 10 Nov 2008 09:09:17 +0000

wan optimization…

It makes it easier for was reasonable fibrinogen by charles and celibrity porn movies a tight asainpussy on the diversification lepidoptera the. Speaking of jessica simpson nude know dependence in the cone as these vehicle’ s handling characteristics…

Comment on Downloads by Kamaraj

Kamaraj — Fri, 07 Nov 2008 04:59:28 +0000

Hi,

Kindly send me the study material for CCIE Voice written and lab to kamaraja@gmail.com.
How hard the CCIE Written, if you share your experience that would be great.

Thanks,
Kamaraj. K

Comment on Gatekeeper – Viazone behaviour by hadi

hadi — Fri, 07 Nov 2008 04:00:52 +0000

i have a question about viazone:
I’ve built some small Lab and topology is,
VG—GK1—-VIAZONE—-GK2—VG
if i used cisco VG, the call is succeded. But, if i used another VG (micronet) the call is fail.
I saw from ethereal that the call is being rejected by GK1, so the call is not even cross VIAZONE.
Would you please give me some advice regarding this problem.

regards,
hadi

Comment on Downloads by Yilmaz

Yilmaz — Thu, 06 Nov 2008 12:13:22 +0000

I would appriciate if you could send the CCIE Lab scenarios to

mehmet1477@live.co.uk

Many many thanks.

Comment on Issues with using MTP in gateways by luissgl

luissgl — Wed, 22 Oct 2008 19:25:33 +0000

hq to hq (g711) hq to br1 (g729) hq to br2 (g729)
br1 to br1 (g711) br1 to hq (g729) br1 to br2 (g729)
br2 to hq (g729) br2 to br1 (g729) br2 to br2 (g729)

Comment on Issues with using MTP in gateways by luissgl

luissgl — Wed, 22 Oct 2008 19:24:54 +0000

Hi Guys, I have a problem with transcoder, right now i dont know if this is a bug or something that I dont understand or I forgot to configure. This is the problem:
I have three sites (HQ)(BR1) and (BR2), with regions:

hq to hq (g711) hq to br1 (g729) hq to br2 (g729)
br1 to br1 (g711) br1 to hq (g729) br1 to br2 (g729)
br2 to hq (g711) br2 to br1 (g729) br2 to br2 (g729)

site hq and br1 are in ccm, br2 is a CME connected throughout a gatekeeper(ICT), for this trunk I need MTP for supplementary services, but if the Xcode asigned to the trunk is not in the same device pool that the phone that is calling or called on ccm, tha call get droped, the phone rings but when the call is answered it gets disconected.

Comment on About by Neil

Neil — Mon, 20 Oct 2008 11:20:51 +0000

Hi
Need some info on the best way to set up the PSTN cloud for the Lab pod, Router, T1/E1 cards etc

neg12@aol.com

Thanks in advance

Comment on Downloads by Neil

Neil — Mon, 20 Oct 2008 11:12:19 +0000

Please send CCIE Lab scenarios to

neg12@aol.com

Thanks

Neil