Ports used by CM

Posted: February 17, 2006 by sankar in Cisco Callmanager, System

Refer : System – > Cisco Callmanager Page

Ethernet Phone Port – Default is 2000. We changed to 4000. Phones started using TCP port 4000.

Digital Port – Default is 2001. This is used by DT-24+ cards

Analog Port – Default is 2002 . This is used by 6624-FXS card for Catalyst 6509.

MGCP Listen port – Default is 2427. This can be changed to any port.Make sure to configure the same port in the MGCP gateway ( router config).

MGCP keep-alive port – Default is 2428.

All these ports can be configured from the range 1024 – 49151.

  1. Well.. I don\\\’t agree.. If you look it from the other side

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s