6608 MGCP configuration

Posted: March 27, 2006 by sankar in 6608 gateway, Gateways, MGCP

To configure a 6608 blade to register with Callmanager, do the following,

a. Log into the 6500 switch and do a sh module to find the slot number in which 6608 is installed

b. Do a "set port voice interface help"

6500# (enable) set port voice interface help
Usage: set port voice interface #mod/port# dhcp enable [vlan #vlan#]
set port voice interface #mod/port# dhcp disable #ipaddrspec#
tftp #ipaddr# [vlan #vlan#]
[gateway #ipaddr#] [dns [ipaddr] [domain_name]]
(ipaddr_spec: #ipaddr# #mask#, or #ipaddr#/#mask#
#mask#: dotted format (255.255.255.0) or number of bits (0..31)
vlan: 1..4094
System DNS will be used if disabling DHCP without DNS parameters)

 For ex:

set port voice interface 7/2 dhcp disable 10.1.1.1/24 vlan #voicevlan# tftp 10.1.1.33 gateway 10.1.1.254 dns 10.1.1.2 cisco.com

or

set port voice interface 7/2 dhcp disable 10.1.1.1 255.255.255.0 vlan #voicevlan# tftp 10.1.1.33 gateway 10.1.1.254 dns 10.1.1.2 cisco.com

 c. Do a sh port <mod/port> and copy the mac-address of the port. Edit this in a notepad, and remove all
"-" (dashes).

 d. Use this mac-address to add a new gateway or add a new conf. bridge or transcoder.

Advertisements
Comments
  1. Morgan says:

    6608 is an SCCP Gateway

  2. cciestudy says:

    6608 uses both MGCP and SCCP. MGCP is used of you configure the ports as T1 to connect to PSTN and SCCP is used if you configure the ports as media resources, like transcoder and conference.

  3. mcalliwj23 says:

    good info thanks

  4. vlance says:

    Hey
    How do change the port type ?
    When I do a >show port 3/1 I see port type unknow and my T1 will not register.
    Thanks

  5. Dan Williams says:

    Good, quick, to the point write up.

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s