How to enable media cut through for H323 clients in CCM?

Posted: August 3, 2006 by cciestudy in CCM Service Parameters

Set the Service Parameter, H225 Device Connect Timer to either 0 or 1.

Default is 0 and media cut through is enabled. To disable set it to 2.

Advertisements
Comments
  1. M SHAHZAD HUSSAIN Says:
    June 6th, 2007 at 5:57 pm
    Hello Sir,

    I am a facing problem in IPT network

    My DID range is 6041XXX
    if any ip phone not connected to CCM 4.1 and on the same time If any person call on that number which in unpluged.
    Instead of NO answer the call automatically “call diversion” convert to any off net number such as 15 or 17 ets.

    Sir

    Please tell me how i can stop “call diversion” or how can i fix thix problem.
    thanks and best regards.
    ok

    • rick says:

      you can route your unassigned dns to say the operator if you dont have vm set up for them..
      on the directory number setup find the field “Unregistered” and uncheck the VM checkbox and put another extension number or an off net number in there.. this field is commonly used for srst setups to reach phones by using the pstn at a location when thier WAN connection is unreachable by call manager.

  2. Pushkar Bhatkoti says:

    noan/busy normally goes to unity or yoru voicemail system.
    it seems that you don’t have voicemail system in place.

    what you can do, create a fake voicemail profile set that profile default, forward all calls a fake DN where it will be end up and in that way it won’t redirect to your pstn and back.

    cheers

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s