$ means “end of digits” and is used for a more specific match. If you have two dial-peers with the same pattern and one with $ and the other without $, then call routing logic will always match the one with $, because that is more specific. Even if you give a lower preference to the dial-peer with $, still it will be matched because by default the dial-plan hunting algorithm is more specific match first and then preference.
dial-peer voice 10 pots
destination-pattern 1000
port 1/0/0
dial-peer voice 11 pots
destination-pattern 1000$
port 1/0/0
preference 5
In this case, always dial-peer 11 will be used to route calls to 1000, even though it has a lower preference.
It is also important in translation rules where ^ defines the start of a string and $ its end.
You can also modify the hunt algorithm using global command ´dial-peer hunt´
so for instance in my case i don’t want the unit to do any dialing, $T in the destination pattern line ( the LEC is going to do the dialing in my case)
DasTo, i am not sure if you got your voice translation profiles working ,i did..i found some good tutorials at brainbump.net.Check one for dial-peers and voice rules/profiles:
http://www.brainbump.net/2009/04/gns3how-to-setup-cme-sip-trunk-to-voip-sip-service-provider-advanced-config-part1b/
Hope it helps!
its a very good site Contents are very special from others
if any body wants voip videos see below
http://voip-ccvp.blogspot.com
the $ sign stops the __________ timer right away and submits the digits to be processed by the call manager. wondering what timer that would be,
a> short timer
b> long timer
c> it does not expire a timer
d> there is a different timer that is stopped
correction: mean to say , call agent. ( not call manager )
Hi sir,
Can we exchange the website link?
My website: http://www.ciscobibles.com
Title: CiscoBibles
Description: Free Cisco Training & Resources – Certification Exam Preparation
If you want, plz let me know.
Thanks.
Best Regards
Raiy
[quote]the $ sign stops the __________ timer right away and submits the digits to be processed by the call manager. wondering what timer that would be,
a> short timer
b> long timer
c> it does not expire a timer
d> there is a different timer that is stopped[/quote]
D
the $ sign stops the __________ timer right away and submits the digits to be processed by the call manager. wondering what timer that would be,
a> short timer
b> long timer
c> it does not expire a timer
d> there is a different timer that is stopped
D
Ur blog, Bamboo Roman Shades “Significance of $ in dial-peer destination pattern | CCIE Voice notes” was worth writing a
comment here! Just simply wanted to point out you
actually did a remarkable work. Thank you ,Jung
Ahaa, its good conversation on the topic of this paragraph at
this place at this blog, I have read all that, so at this
time me also commenting at this place.
You need to take part in a contest for one of the best websites online.
I am going to recommend this site!
Hi!
We’re a Cisco Solution Partner specializing in software development for Cisco Collaboration and Contact Center solutions.
We’d also like to publish some article on your blog cciev.wordpress.com.
Please contact me via email.
Well Comedy Central, Nikleodeon and the N were added as networks, with South Park Seasons 1 and 2 Drawn Together and Standup, Spongebob, Dora the explorer and Zoey 101. MTV has added 7 shows including Punked and Beavis and Butthead. Click http://link.mx/hool081945
Hi Guru I need you help